2 Way Crossover Calculator
What this calculator measures
Calculate separate ideal first-order components for a two-way crossover using individual nominal resistive driver models.
Inputs and units
Keep all entries on the measurement boundary and unit convention stated below. Example values are editable calculation inputs, not specifications for your equipment or a particular production job.
| Input | Example value or available basis |
|---|---|
| Ideal First-Order Electrical Corner (Hz) | 2500 |
| Woofer Resistive Model (ohms) | 8 |
| Tweeter Resistive Model (ohms) | 8 |
| Individual first-order component | Woofer series inductor (mH); Tweeter series capacitor (microfarads) |
Calculation method
Calculate separate ideal first-order components for a two-way crossover using individual nominal resistive driver models.
The woofer branch uses series L = Rw / (2 pi f), reported in mH. The tweeter branch uses series C = 1 / (2 pi f Rt), reported in microfarads.
Worked example
At 2500 Hz with 8-ohm models, woofer L is approximately 0.509296 mH and tweeter C approximately 7.957747 microfarads.
How to use the result
Select the output quantity you need, enter compatible values, and compare the result with the independently worked example. Where the form offers several output choices, read the units in that choice; different physical quantities must not be combined into one total.
Limits and checks
This is an ideal first-order electrical model, not a complete optimized acoustic crossover or a second-order network.
Real impedance, losses, attenuation networks, acoustic phase, driver response, and operating limits require separate verification.
An undefined or out-of-domain combination produces a calculation-failure message. Check the positive denominators, stated input ranges, and any required matching basis before changing the calculation inputs.