Speaker SPL Calculator

Speaker SPL Calculator

Estimate free-field point-source SPL from 1 W / 1 m sensitivity, power, distance, and an explicitly uncorrelated equal-source assumption.
Ideal-reference sound level:
Support this tool
Buy us a coffee
If this Speaker SPL Calculator helped you, you can support the site with a small donation. It keeps the tools on the site free and supports ongoing improvements.
Buy us a coffee
Secure donation via Gumroad

What this calculator measures

Estimate free-field point-source SPL from 1 W / 1 m sensitivity, power, distance, and an explicitly uncorrelated equal-source assumption.

Inputs and units

Keep all entries on the measurement boundary and unit convention stated below. Example values are editable calculation inputs, not specifications for your equipment or a particular production job.

Input Example value or available basis
Sensitivity (dB SPL at 1 W / 1 m) 88
Electrical Power per Speaker (W) 10
Reference-to-Listener Distance (m) 2
Equal Uncorrelated Sources (whole number) 1
Documented Site Adjustment (dB; normally 0) 0

Calculation method

Estimate free-field point-source SPL from 1 W / 1 m sensitivity, power, distance, and an explicitly uncorrelated equal-source assumption.

The model adds 10 log10(power), subtracts 20 log10(distance in metres), and adds 10 log10(source count). A site adjustment is entered explicitly rather than inferred from a room label.

Worked example

A speaker rated 88 dB at 1 W / 1 m, driven with 10 W and observed 2 m away, gives approximately 91.9794 dB under the ideal model.

How to use the result

Select the output quantity you need, enter compatible values, and compare the result with the independently worked example. Where the form offers several output choices, read the units in that choice; different physical quantities must not be combined into one total.

Limits and checks

Normalize 2.83 V sensitivity to a compatible power basis before entering it. Real rooms, arrays, directivity, compression, and coherent interference can depart from this model.

The result is an estimate of level, not a recommendation about listening exposure.

An undefined or out-of-domain combination produces a calculation-failure message. Check the positive denominators, stated input ranges, and any required matching basis before changing the calculation inputs.

References and method

Table of contents