Zobel Network Calculator

Zobel Network Calculator

Calculate a series-RC branch across an ideal driver modeled as DC resistance Re in series with lossless inductance Le.
Selected series-RC branch component (units in choice):
Support this tool
Buy us a coffee
If this Zobel Network Calculator helped you, you can support the site with a small donation. It keeps the tools on the site free and supports ongoing improvements.
Buy us a coffee
Secure donation via Gumroad

What this calculator measures

Calculate a series-RC branch across an ideal driver modeled as DC resistance Re in series with lossless inductance Le.

Inputs and units

Keep all entries on the measurement boundary and unit convention stated below. Example values are editable calculation inputs, not specifications for your equipment or a particular production job.

Input Example value or available basis
Voice-Coil DC Resistance Model Re (ohms; not nominal impedance) 6.4
Lossless Voice-Coil Inductance Model Le (mH) 0.5
Zobel branch component Series branch resistor Rz (ohms); Series branch capacitor Cz (microfarads)

Calculation method

Connect Rz and Cz in series with each other, then connect that whole branch in parallel with the Re + s Le driver model.

For that exact lossless RL model, Rz = Re and Cz = Le / Re squared, with Le in henries and Cz in farads. The parallel total equals Re at every frequency in the ideal model.

Worked example

Re of 8 ohms and Le of 0.5 mH give Rz of 8 ohms and Cz of 7.8125 microfarads. Re of 6.4 ohms and Le of 0.5 mH give Cz of 12.207031 microfarads.

How to use the result

Select the output quantity you need, enter compatible values, and compare the result with the independently worked example. Where the form offers several output choices, read the units in that choice; different physical quantities must not be combined into one total.

Limits and checks

Real voice-coil inductance is lossy, frequency dependent, and can vary with current and displacement. A two-part RC network is only an initial approximation for actual drivers.

This does not flatten the motional resonance peak, guarantee acoustic equalization, or calculate resistor dissipation or component ratings. Include the branch in the complete crossover and amplifier-load model.

An undefined or out-of-domain combination produces a calculation-failure message. Check the positive denominators, stated input ranges, and any required matching basis before changing the calculation inputs.

References and method

Table of contents