Port Air Speed Calculator

Port Air Speed Calculator

Calculate peak section-mean air speed from total peak volume velocity through identical equally loaded round ports and their clear cross-sectional area.
Peak section-mean port air speed:
Support this tool
Buy us a coffee
If this Port Air Speed Calculator helped you, you can support the site with a small donation. It keeps the tools on the site free and supports ongoing improvements.
Buy us a coffee
Secure donation via Gumroad

What this calculator measures

Calculate peak section-mean air speed from total peak volume velocity through identical equally loaded round ports and their clear cross-sectional area.

Inputs and units

Keep all entries on the measurement boundary and unit convention stated below. Example values are editable calculation inputs, not specifications for your equipment or a particular production job.

Input Example value or available basis
Total Peak Port Volume Velocity from a Matched Model (L/s) 100
Identical Equally Loaded Ports (whole number) 1
Clear Diameter at the Evaluated Port Section (cm) 10

Calculation method

Calculate peak section-mean air speed from total peak volume velocity through identical equally loaded round ports and their clear cross-sectional area.

Convert peak litres per second to cubic metres per second, then divide by the total clear area of all equally loaded ports. Use volume velocity from a driver/enclosure model or an appropriate measurement at the operating frequency and drive level.

Worked example

A total peak volume velocity of 100 L/s through one clear 10 cm round section gives approximately 12.73240 m/s; two identical equally loaded sections give approximately 6.36620 m/s for the same total flow.

How to use the result

Select the output quantity you need, enter compatible values, and compare the result with the independently worked example. Where the form offers several output choices, read the units in that choice; different physical quantities must not be combined into one total.

Limits and checks

Box air volume and tuning frequency alone cannot establish flow amplitude. Keep peak versus RMS and total versus per-port quantities consistent.

A changed port design changes the acoustic system; rerun the enclosure model. This area comparison does not predict a universal chuffing threshold, local flare velocity, turbulence or compression.

An undefined or out-of-domain combination produces a calculation-failure message. Check the positive denominators, stated input ranges, and any required matching basis before changing the calculation inputs.

References and method

Table of contents