Fourth Order Crossover Calculator
What this calculator measures
Evaluate the ideal fourth-order Linkwitz-Riley low-pass or high-pass amplitude at one frequency. This tool does not synthesize a passive component network.
Inputs and units
Keep all entries on the measurement boundary and unit convention stated below. Example values are editable calculation inputs, not specifications for your equipment or a particular production job.
| Input | Example value or available basis |
|---|---|
| Ideal Linkwitz-Riley Fourth-Order Corner (Hz) | 2000 |
| Response Frequency to Evaluate (Hz) | 2000 |
| Ideal LR4 response | Low-pass amplitude ratio; High-pass amplitude ratio; Low-pass amplitude (dB); High-pass amplitude (dB) |
Calculation method
Evaluate the ideal fourth-order Linkwitz-Riley low-pass or high-pass amplitude at one frequency. This tool does not synthesize a passive component network.
An ideal LR4 branch cascades two second-order Butterworth sections at the same corner. With r=f/fc, low-pass amplitude is 1/(1+r to the fourth), and high-pass amplitude is r to the fourth/(1+r to the fourth). Decibel amplitude is 20 log10 of that ratio.
Worked example
At the 2000 Hz corner, both ideal branches have an amplitude ratio of 0.5, or approximately -6.0206 dB. These magnitudes alone do not establish the real drivers' acoustic summation.
How to use the result
Select the output quantity you need, enter compatible values, and compare the result with the independently worked example. Where the form offers several output choices, read the units in that choice; different physical quantities must not be combined into one total.
Limits and checks
A practical active, DSP, or passive implementation needs a defined topology, correct phase/polarity behavior, driver responses, and measurement. Do not treat this response calculator as a list of passive parts.
An undefined or out-of-domain combination produces a calculation-failure message. Check the positive denominators, stated input ranges, and any required matching basis before changing the calculation inputs.