Speaker Coverage Angle Calculator

Speaker Coverage Angle Calculator

Calculate the symmetric geometric footprint width produced by a stated full angle on a perpendicular plane at a stated distance.
Symmetric geometric footprint width:
Support this tool
Buy us a coffee
If this Speaker Coverage Angle Calculator helped you, you can support the site with a small donation. It keeps the tools on the site free and supports ongoing improvements.
Buy us a coffee
Secure donation via Gumroad

What this calculator measures

Calculate the symmetric geometric footprint width produced by a stated full angle on a perpendicular plane at a stated distance.

Inputs and units

Keep all entries on the measurement boundary and unit convention stated below. Example values are editable calculation inputs, not specifications for your equipment or a particular production job.

Input Example value or available basis
Perpendicular Source-to-Plane Distance (m) 3
Full Symmetric Geometric Coverage Angle (degrees) 90

Calculation method

Calculate the symmetric geometric footprint width produced by a stated full angle on a perpendicular plane at a stated distance.

Width is 2 times perpendicular distance times tan(full angle/2). Use the full angle, not the off-axis half angle, in the angle field.

Worked example

A full 90-degree cone at a perpendicular plane distance of 3 m has a geometric width of 6 m.

How to use the result

Select the output quantity you need, enter compatible values, and compare the result with the independently worked example. Where the form offers several output choices, read the units in that choice; different physical quantities must not be combined into one total.

Limits and checks

This assumes a centered symmetric cone and perpendicular plane. Tilted aiming or an asymmetric horn requires different geometry.

Acoustic coverage depends on frequency and level convention. A geometric edge does not establish equal loudness or a particular sound-level threshold.

An undefined or out-of-domain combination produces a calculation-failure message. Check the positive denominators, stated input ranges, and any required matching basis before changing the calculation inputs.

References and method

Table of contents