Crossover Point Calculator
What this calculator measures
Estimate an equal-magnitude crossing between two measured driver responses using two frequencies that bracket a change in which driver is louder.
Inputs and units
Keep all entries on the measurement boundary and unit convention stated below. Example values are editable calculation inputs, not specifications for your equipment or a particular production job.
| Input | Example value or available basis |
|---|---|
| Lower Bracketing Measurement Frequency (Hz) | 2000 |
| Upper Bracketing Measurement Frequency (Hz) | 3000 |
| Woofer Minus Tweeter Level at Lower Frequency (dB) | 3 |
| Woofer Minus Tweeter Level at Upper Frequency (dB) | -4 |
Calculation method
Estimate an equal-magnitude crossing between two measured driver responses using two frequencies that bracket a change in which driver is louder.
Assume woofer-minus-tweeter level difference varies linearly with log frequency over the bracket. Crossing frequency is f1 times (f2/f1) raised to -D1/(D2-D1).
Worked example
At 2000 Hz the woofer is 3 dB louder; at 3000 Hz it is 4 dB quieter. Log-frequency interpolation gives approximately 2379.565579 Hz for the equal-magnitude crossing.
How to use the result
Select the output quantity you need, enter compatible values, and compare the result with the independently worked example. Where the form offers several output choices, read the units in that choice; different physical quantities must not be combined into one total.
Limits and checks
Use separate driver responses from the same microphone position, drive reference, processing state, and measurement conditions. The bracket must contain a crossing; equal differences at both ends do not define a unique crossing.
This interpolation does not choose a safe crossover frequency, calculate components, resolve multiple crossings, or evaluate phase and acoustic summation. Measure more densely when the responses are curved or irregular.
An undefined or out-of-domain combination produces a calculation-failure message. Check the positive denominators, stated input ranges, and any required matching basis before changing the calculation inputs.