Speaker SPL from Sensitivity Calculator
What this calculator measures
Estimate free-field point-source SPL from a 1 W and 1 m sensitivity reference, electrical power, distance, and equal uncorrelated source count.
Inputs and units
Keep all entries on the measurement boundary and unit convention stated below. Example values are editable calculation inputs, not specifications for your equipment or a particular production job.
| Input | Example value or available basis |
|---|---|
| Sensitivity (dB SPL at 1 W / 1 m) | 88 |
| Electrical Power per Speaker (W) | 10 |
| Reference-to-Listener Distance (m) | 2 |
| Equal Uncorrelated Sources (whole number) | 1 |
| Documented Site Adjustment (dB; normally 0) | 0 |
Calculation method
Estimate free-field point-source SPL from a 1 W and 1 m sensitivity reference, electrical power, distance, and equal uncorrelated source count.
Level equals sensitivity plus 10 log10(power) minus 20 log10(distance) plus 10 log10(equal uncorrelated sources) plus an explicitly documented adjustment.
Worked example
With sensitivity 88 dB, 25 W per source, 3 m distance, two equal uncorrelated sources, and zero adjustment, the reference level is approximately 95.447275 dB SPL.
How to use the result
Select the output quantity you need, enter compatible values, and compare the result with the independently worked example. Where the form offers several output choices, read the units in that choice; different physical quantities must not be combined into one total.
Limits and checks
Normalize voltage-sensitivity specifications before using a 1 W reference. Equal uncorrelated-source gain is not coherent array gain.
This omits real directivity, room response, compression, excursion, losses, and background noise; it does not establish safe exposure or output capability.
An undefined or out-of-domain combination produces a calculation-failure message. Check the positive denominators, stated input ranges, and any required matching basis before changing the calculation inputs.