Car Audio Power Calculator
What this calculator measures
Estimate the combined DC input power or current for separately stated amplifier output conditions and efficiencies, plus explicitly excluded auxiliary loads.
Inputs and units
Keep all entries on the measurement boundary and unit convention stated below. Example values are editable calculation inputs, not specifications for your equipment or a particular production job.
| Input | Example value or available basis |
|---|---|
| Total Full-Range Amplifier Output for the Chosen Condition (W) | 200 |
| Total Subwoofer Amplifier Output for the Same Condition (W) | 600 |
| Full-Range Amplifier Efficiency (fraction) | 0.65 |
| Subwoofer Amplifier Efficiency (fraction) | 0.85 |
| Additional DC Input Loads Excluded from Those Efficiencies (W) | 20 |
| DC Voltage at the Defined Supply Boundary (V) | 13.8 |
| Budget result | Total DC input power (W); Estimated average DC input current (A) |
Calculation method
Estimate the combined DC input power or current for separately stated amplifier output conditions and efficiencies, plus explicitly excluded auxiliary loads.
Input watts equal full-range output divided by its efficiency plus subwoofer output divided by its efficiency plus excluded auxiliary input watts. Divide by the stated DC voltage for average input current.
Worked example
For 200 W full-range output at 65% efficiency, 600 W subwoofer output at 85% efficiency, and 20 W excluded auxiliary load, total input is approximately 1033.574661 W or 74.896715 A at 13.8 V.
How to use the result
Select the output quantity you need, enter compatible values, and compare the result with the independently worked example. Where the form offers several output choices, read the units in that choice; different physical quantities must not be combined into one total.
Limits and checks
Use the same signal and time condition for both amplifier groups. If efficiency already includes an auxiliary load, do not add that load twice.
This average-power budget does not size supply wiring, fuses, alternators, batteries, startup demand, or transient capability. Those require the relevant equipment and installation design.
An undefined or out-of-domain combination produces a calculation-failure message. Check the positive denominators, stated input ranges, and any required matching basis before changing the calculation inputs.