Amplifier Wattage for Speakers Calculator
What this calculator measures
Estimate required power per equal uncorrelated source from sensitivity, distance, listening-position target, and explicit headroom.
Inputs and units
Keep all entries on the measurement boundary and unit convention stated below. Example values are editable calculation inputs, not specifications for your equipment or a particular production job.
| Input | Example value or available basis |
|---|---|
| Target SPL at Listening Position (dB) | 85 |
| Explicit Peak Headroom (dB) | 6 |
| Sensitivity (dB SPL at 1 W / 1 m) | 88 |
| Listening Distance (m) | 3 |
| Equal Uncorrelated Sources | 1 |
| Documented Room or Placement Adjustment (dB) | 0 |
Calculation method
Estimate required power per equal uncorrelated source from sensitivity, distance, listening-position target, and explicit headroom.
Use P = 10 to the power of ((target + headroom – sensitivity + 20 log10(distance) – 10 log10(source count) – adjustment) / 10). Multiply by source count only when a total electrical output budget is wanted.
Worked example
At 3 m, sensitivity 88 dB at 1 W / 1 m, target 85 dB, 6 dB headroom, and two equal uncorrelated sources, estimated power is approximately 8.978680 W per source, or 17.957361 W total.
How to use the result
Select the output quantity you need, enter compatible values, and compare the result with the independently worked example. Where the form offers several output choices, read the units in that choice; different physical quantities must not be combined into one total.
Limits and checks
Source count assumes equal uncorrelated contributions at the listening point. Coherent arrays, unequal paths, directivity, reflections, and compression require a more suitable model.
Speaker handling, amplifier load compatibility, and protection remain separate checks. Do not add a peak allowance twice to a target already specified as the desired peak.
An undefined or out-of-domain combination produces a calculation-failure message. Check the positive denominators, stated input ranges, and any required matching basis before changing the calculation inputs.