Sealed Subwoofer Box Calculator
What this calculator measures
Estimate an ideal small-signal sealed-box net air target from Vas, Qts and target Qtc, or add explicit occupied volumes to find gross internal geometry.
Inputs and units
Keep all entries on the measurement boundary and unit convention stated below. Example values are editable calculation inputs, not specifications for your equipment or a particular production job.
| Input | Example value or available basis |
|---|---|
| Vas per Identical Driver (L) | 50 |
| Free-Air Total Qts | 0.4 |
| Target Sealed-System Qtc | 0.707 |
| Identical Drivers Sharing the Airspace (whole number) | 1 |
| Physical Displacement per Driver (L) | 2 |
| Total Braces and Other Occupied Volume (L) | 0 |
| Volume basis | Required gross internal geometry (L); Ideal net working air target (L) |
Calculation method
Estimate an ideal small-signal sealed-box net air target from Vas, Qts and target Qtc, or add explicit occupied volumes to find gross internal geometry.
For identical drivers sharing one conventional airspace, net Vb equals total Vas divided by [(Qtc/Qts) squared minus one]. Gross internal geometry adds physical driver and other displacement.
Worked example
With one 50 L Vas driver, Qts 0.4 and Qtc 0.707, the ideal net target is approximately 23.53987 L. Adding 2 L of physical driver displacement gives approximately 25.53987 L of gross internal geometry before other occupied volumes.
How to use the result
Select the output quantity you need, enter compatible values, and compare the result with the independently worked example. Where the form offers several output choices, read the units in that choice; different physical quantities must not be combined into one total.
Limits and checks
A finite positive target requires Qtc greater than Qts in this ideal model. Equal Q values imply an unbounded volume, and a lower target is not obtained by accepting a negative result.
The simplified alignment omits leakage, absorption, added electrical resistance, nonlinear behavior and response/excursion checks. Isobaric arrangements and dissimilar drivers require a different model.
An undefined or out-of-domain combination produces a calculation-failure message. Check the positive denominators, stated input ranges, and any required matching basis before changing the calculation inputs.