Amplifier Gain Calculator

Amplifier Gain Calculator

Calculate voltage gain from compatible RMS input and output voltages, either as a ratio or in decibels.
Voltage gain (chosen units):
Support this tool
Buy us a coffee
If this Amplifier Gain Calculator helped you, you can support the site with a small donation. It keeps the tools on the site free and supports ongoing improvements.
Buy us a coffee
Secure donation via Gumroad

What this calculator measures

Calculate voltage gain from compatible RMS input and output voltages, either as a ratio or in decibels.

Inputs and units

Keep all entries on the measurement boundary and unit convention stated below. Example values are editable calculation inputs, not specifications for your equipment or a particular production job.

Input Example value or available basis
Input RMS Voltage (V) 1
Output RMS Voltage (V) 20
Gain units Voltage gain (V/V); Voltage gain (dB)

Calculation method

Calculate voltage gain from compatible RMS input and output voltages, either as a ratio or in decibels.

Linear voltage gain is Vout/Vin. Decibel voltage gain is 20 log10(Vout/Vin); the dB option requires both voltages to be positive.

Worked example

An input of 1 V RMS and output of 20 V RMS give a voltage gain of 20 V/V, or approximately 26.0206 dB.

How to use the result

Select the output quantity you need, enter compatible values, and compare the result with the independently worked example. Where the form offers several output choices, read the units in that choice; different physical quantities must not be combined into one total.

Limits and checks

Use measurements with compatible signal, bandwidth, loading, and RMS definitions. This is a voltage-gain conversion, not a power-gain or impedance-matching calculation.

An undefined or out-of-domain combination produces a calculation-failure message. Check the positive denominators, stated input ranges, and any required matching basis before changing the calculation inputs.

References and method

Table of contents