Subwoofer Box Design Calculator

Subwoofer Box Design Calculator

Calculate gross internal enclosure volume from a driver-specific net-air target and the actual internal displacement of the driver, braces, and port assembly.
Required gross internal geometric volume:
Support this tool
Buy us a coffee
If this Subwoofer Box Design Calculator helped you, you can support the site with a small donation. It keeps the tools on the site free and supports ongoing improvements.
Buy us a coffee
Secure donation via Gumroad

What this calculator measures

Calculate gross internal enclosure volume from a driver-specific net-air target and the actual internal displacement of the driver, braces, and port assembly.

Inputs and units

Keep all entries on the measurement boundary and unit convention stated below. Example values are editable calculation inputs, not specifications for your equipment or a particular production job.

Input Example value or available basis
Required Net Air Volume from Driver Design (L) 40
Driver Displacement Inside Box (L) 3
Braces and Other Solid Displacement (L) 2
Internal Port Assembly Displacement (L) 5

Calculation method

Calculate gross internal enclosure volume from a driver-specific net-air target and the actual internal displacement of the driver, braces, and port assembly.

Add the occupied internal volumes to the required air volume. Gross internal volume is not external box volume; wall thickness is handled separately when dimensions are chosen.

Worked example

A documented 40 L net target plus 3 L driver, 2 L bracing, and 5 L port displacement requires 50 L of gross internal geometry.

How to use the result

Select the output quantity you need, enter compatible values, and compare the result with the independently worked example. Where the form offers several output choices, read the units in that choice; different physical quantities must not be combined into one total.

Limits and checks

Obtain the net target from a suitable driver/alignment design. Driver diameter alone cannot determine the required enclosure, and sealed-box geometry is not changed by a port-tuning selector.

An undefined or out-of-domain combination produces a calculation-failure message. Check the positive denominators, stated input ranges, and any required matching basis before changing the calculation inputs.

References and method

Table of contents