Enclosure Volume Calculator

Enclosure Volume Calculator

Calculate gross internal geometric volume from three clear rectangular cavity dimensions, then select cubic inches, cubic feet or litres.
Selected gross internal geometry (units in choice):
Support this tool
Buy us a coffee
If this Enclosure Volume Calculator helped you, you can support the site with a small donation. It keeps the tools on the site free and supports ongoing improvements.
Buy us a coffee
Secure donation via Gumroad

What this calculator measures

Calculate gross internal geometric volume from three clear rectangular cavity dimensions, then select cubic inches, cubic feet or litres.

Inputs and units

Keep all entries on the measurement boundary and unit convention stated below. Example values are editable calculation inputs, not specifications for your equipment or a particular production job.

Input Example value or available basis
Clear Internal Length (in) 24
Clear Internal Width (in) 16
Clear Internal Height (in) 14
Geometric volume units Cubic inches; Cubic feet; Litres

Calculation method

Calculate gross internal geometric volume from three clear rectangular cavity dimensions, then select cubic inches, cubic feet or litres.

Multiply the internal dimensions in inches. Divide cubic inches by 1728 for cubic feet or multiply by the exact factor 0.016387064 for litres.

Worked example

A 24 by 16 by 14 in clear cavity contains 5376 cubic inches, equivalent to approximately 3.111111 cu ft or 88.096856 L.

How to use the result

Select the output quantity you need, enter compatible values, and compare the result with the independently worked example. Where the form offers several output choices, read the units in that choice; different physical quantities must not be combined into one total.

Limits and checks

This is gross internal geometry before occupied driver, port or brace volumes are deducted. External dimensions cannot be substituted without accounting for wall thickness.

An undefined or out-of-domain combination produces a calculation-failure message. Check the positive denominators, stated input ranges, and any required matching basis before changing the calculation inputs.

References and method

Table of contents