Subwoofer Phase Delay Calculator

Subwoofer Phase Delay Calculator

Convert a signed pure time delay into its unwrapped phase change at one stated frequency.
Unwrapped phase change from pure delay:
Support this tool
Buy us a coffee
If this Subwoofer Phase Delay Calculator helped you, you can support the site with a small donation. It keeps the tools on the site free and supports ongoing improvements.
Buy us a coffee
Secure donation via Gumroad

What this calculator measures

Convert a signed pure time delay into its unwrapped phase change at one stated frequency.

Inputs and units

Keep all entries on the measurement boundary and unit convention stated below. Example values are editable calculation inputs, not specifications for your equipment or a particular production job.

Input Example value or available basis
Added Pure Delay (ms; positive means later) 2
Reference Frequency (Hz) 80

Calculation method

Convert a signed pure time delay into its unwrapped phase change at one stated frequency.

For exp(-j omega t), phase in degrees is -360 f t, or -0.36 f times delay in milliseconds. A positive added delay produces a negative phase change.

Worked example

An added 2 ms pure delay gives -57.6 degrees at 80 Hz, -28.8 degrees at 40 Hz, and -115.2 degrees at 160 Hz.

How to use the result

Select the output quantity you need, enter compatible values, and compare the result with the independently worked example. Where the form offers several output choices, read the units in that choice; different physical quantities must not be combined into one total.

Limits and checks

Phase wraps every 360 degrees, so a single-frequency phase measurement does not uniquely determine delay. Preserve the sign and unwrapped convention.

A loudspeaker, crossover, all-pass phase control, or complete subwoofer path need not behave as pure delay. This conversion does not determine which source should be delayed or establish alignment.

An undefined or out-of-domain combination produces a calculation-failure message. Check the positive denominators, stated input ranges, and any required matching basis before changing the calculation inputs.

References and method

Table of contents