Speaker Throw Distance Calculator

Speaker Throw Distance Calculator

Estimate distance at which a single point-source free-field reference meets a stated level plus explicit headroom.
Ideal-reference distance for one point source:
Support this tool
Buy us a coffee
If this Speaker Throw Distance Calculator helped you, you can support the site with a small donation. It keeps the tools on the site free and supports ongoing improvements.
Buy us a coffee
Secure donation via Gumroad

What this calculator measures

Estimate distance at which a single point-source free-field reference meets a stated level plus explicit headroom.

Inputs and units

Keep all entries on the measurement boundary and unit convention stated below. Example values are editable calculation inputs, not specifications for your equipment or a particular production job.

Input Example value or available basis
Sensitivity at 1 W and 1 m (dB SPL) 90
Available Electrical Power for the Defined Condition (W) 100
Baseline Target SPL at the Listener (dB) 85
Additional Explicit Peak Headroom (dB) 6
Documented Level Adjustment Relative to the Free-Field Reference (dB) 0

Calculation method

Estimate distance at which a single point-source free-field reference meets a stated level plus explicit headroom.

Distance in meters equals 10 raised to (sensitivity + 10 log10(power) + documented adjustment – target – headroom) / 20.

Worked example

Sensitivity 90 dB at 1 W and 1 m, available power 100 W, baseline target 85 dB, 6 dB headroom, and zero adjustment give approximately 8.912509 m.

How to use the result

Select the output quantity you need, enter compatible values, and compare the result with the independently worked example. Where the form offers several output choices, read the units in that choice; different physical quantities must not be combined into one total.

Limits and checks

This ideal reference is not a guaranteed useful range. Directivity, frequency response, reflections, absorption, background noise, intelligibility, compression, excursion, and coverage require separate evaluation.

Power and sensitivity must use compatible references. Do not add headroom twice to a target already defined as the intended peak. Do not assign room gain without evidence.

An undefined or out-of-domain combination produces a calculation-failure message. Check the positive denominators, stated input ranges, and any required matching basis before changing the calculation inputs.

References and method

Table of contents