Baffle Step Compensation Calculator
What this calculator measures
Estimate a rough width-based baffle transition and individual components of a defined passive shelving network. Choose the required attenuation from acoustic evidence, not a room-placement preset.
Inputs and units
Keep all entries on the measurement boundary and unit convention stated below. Example values are editable calculation inputs, not specifications for your equipment or a particular production job.
| Input | Example value or available basis |
|---|---|
| Baffle Width for Rough Transition Estimate (cm) | 25 |
| Resistive Driver Model (ohms) | 8 |
| Explicit High-Frequency Shelf Attenuation (dB) | 4 |
| Estimate or defined series shelf component | Rough width-based transition (Hz); Parallel-branch resistor Rb (ohms); Parallel-branch inductor L (mH) |
Calculation method
Estimate a rough width-based baffle transition and individual components of a defined passive shelving network. Choose the required attenuation from acoustic evidence, not a room-placement preset.
The rough transition is 115 divided by width in metres. For the specific network consisting of Rb parallel with L, inserted in series with a resistive driver R, high/low voltage ratio a=10^(-A/20), Rb=R(1/a-1), and L=Rb sqrt(a)/(2 pi fc). The chosen fc is the geometric mean of the network pole and zero.
Worked example
A 25 cm width gives a rough transition estimate of 460 Hz. With an 8-ohm resistive model and 4 dB specified shelf attenuation, Rb is approximately 4.67915 ohms; select the inductor output separately for the matching defined network.
How to use the result
Select the output quantity you need, enter compatible values, and compare the result with the independently worked example. Where the form offers several output choices, read the units in that choice; different physical quantities must not be combined into one total.
Limits and checks
The width formula is a rough diffraction scale, not a measured required correction. Baffle shape, driver position, boundaries and crossover response affect the actual result.
The stated passive network dissipates power and changes loading. The cited Elliott article discusses the diffraction estimate and a different line-level equalizer; do not substitute its circuit values into this speaker-level topology. Verify the complete transfer function and acoustic result.
An undefined or out-of-domain combination produces a calculation-failure message. Check the positive denominators, stated input ranges, and any required matching basis before changing the calculation inputs.