Woofer Low Pass Calculator
What this calculator measures
Calculate an ideal first-order series woofer inductor with an explicit already-combined, all-series, or all-parallel nominal resistive load boundary.
Inputs and units
Keep all entries on the measurement boundary and unit convention stated below. Example values are editable calculation inputs, not specifications for your equipment or a particular production job.
| Input | Example value or available basis |
|---|---|
| Ideal First-Order Electrical Corner (Hz) | 500 |
| Already Combined Load or Per-Driver Nominal Model, According to Choice (ohms) | 8 |
| Identical Drivers (ignored for already combined load) | 1 |
| Load boundary | Already combined load; Identical drivers all in series; Identical drivers all in parallel |
Calculation method
Calculate an ideal first-order series woofer inductor with an explicit already-combined, all-series, or all-parallel nominal resistive load boundary.
Determine the combined resistance from the selected boundary, then use L = R/(2 pi f), reported in millihenries. Driver count is ignored when the load is already combined.
Worked example
At 500 Hz, an already combined 8-ohm load needs approximately 2.546479 mH regardless of the unused count field. Two 8-ohm drivers in parallel give 4 ohms and approximately 1.273240 mH.
How to use the result
Select the output quantity you need, enter compatible values, and compare the result with the independently worked example. Where the form offers several output choices, read the units in that choice; different physical quantities must not be combined into one total.
Limits and checks
This is a lossless first-order electrical estimate. Actual driver impedance, inductor DCR, current, heating, core behavior, acoustic response, and complete network require review.
The all-series and all-parallel choices assume identical whole drivers. Mixed or grouped networks need a separate reduction before using the already combined choice.
An undefined or out-of-domain combination produces a calculation-failure message. Check the positive denominators, stated input ranges, and any required matching basis before changing the calculation inputs.