Passive Crossover Calculator
What this calculator measures
Calculate one ideal first-order series inductor or capacitor for an individual resistive driver model.
Inputs and units
Keep all entries on the measurement boundary and unit convention stated below. Example values are editable calculation inputs, not specifications for your equipment or a particular production job.
| Input | Example value or available basis |
|---|---|
| Ideal First-Order Electrical Corner (Hz) | 2500 |
| Individual Driver Resistive Model (ohms) | 8 |
| Individual series component | Low-pass series inductor (mH); High-pass series capacitor (microfarads) |
Calculation method
Calculate one ideal first-order series inductor or capacitor for an individual resistive driver model.
Low-pass L = R/(2 pi f), reported in mH. High-pass C = 1/(2 pi f R), reported in microfarads.
Worked example
At 2500 Hz and 8 ohms, series low-pass inductance is approximately 0.509296 mH and series high-pass capacitance approximately 7.957747 microfarads.
How to use the result
Select the output quantity you need, enter compatible values, and compare the result with the independently worked example. Where the form offers several output choices, read the units in that choice; different physical quantities must not be combined into one total.
Limits and checks
This is a defined first-order electrical section, not a complete acoustic crossover or driver-protection guarantee.
Real driver impedance, acoustic response, component loss, attenuation networks, phase, spacing, and output limits require separate modeling and measurement.
An undefined or out-of-domain combination produces a calculation-failure message. Check the positive denominators, stated input ranges, and any required matching basis before changing the calculation inputs.