Speaker Port Velocity Calculator

Speaker Port Velocity Calculator

Convert a separately established total peak port volume velocity into peak average air velocity through identical round ports.
Peak cross-sectional average port velocity:
Support this tool
Buy us a coffee
If this Speaker Port Velocity Calculator helped you, you can support the site with a small donation. It keeps the tools on the site free and supports ongoing improvements.
Buy us a coffee
Secure donation via Gumroad

What this calculator measures

Convert a separately established total peak port volume velocity into peak average air velocity through identical round ports.

Inputs and units

Keep all entries on the measurement boundary and unit convention stated below. Example values are editable calculation inputs, not specifications for your equipment or a particular production job.

Input Example value or available basis
Total Peak Port Volume Velocity from a Model or Measurement (m3/s) 0.12
Identical Round Ports Sharing Flow Equally 1
Internal Diameter of Each Port (cm) 10

Calculation method

Convert a separately established total peak port volume velocity into peak average air velocity through identical round ports.

Peak average speed is total peak volume velocity divided by the combined internal cross-sectional area. All identical ports are assumed to share flow equally.

Worked example

A total peak port volume velocity of 0.12 cubic meters per second through one 10 cm internal-diameter port gives approximately 15.278875 m/s. Two identical ports sharing that same total flow give approximately 7.639437 m/s.

How to use the result

Select the output quantity you need, enter compatible values, and compare the result with the independently worked example. Where the form offers several output choices, read the units in that choice; different physical quantities must not be combined into one total.

Limits and checks

The input must be vent volume velocity at the relevant frequency, drive level, and filtering. It is not simply cone Sd times Xmax times angular frequency at box tuning.

This is a cross-sectional average and does not resolve local peak flow, flare behavior, turbulence, compression, acoustic losses, or a universal noise threshold. Match peak or RMS conventions consistently.

An undefined or out-of-domain combination produces a calculation-failure message. Check the positive denominators, stated input ranges, and any required matching basis before changing the calculation inputs.

References and method

Table of contents