Slot Port Length Calculator
What this calculator measures
Estimate a constant-area slot port physical centerline length from the Helmholtz model using an explicitly supplied total end correction.
Inputs and units
Keep all entries on the measurement boundary and unit convention stated below. Example values are editable calculation inputs, not specifications for your equipment or a particular production job.
| Input | Example value or available basis |
|---|---|
| Net Air Cavity Volume (L) | 35 |
| Target Helmholtz Tuning (Hz) | 35 |
| Internal Slot Width (cm) | 30 |
| Internal Slot Height (cm) | 4 |
| Assumed Sound Speed (m/s) | 343 |
| Total Effective End Correction from the Chosen Geometry Model (cm) | 9 |
Calculation method
Estimate a constant-area slot port physical centerline length from the Helmholtz model using an explicitly supplied total end correction.
Effective length in meters is (c/(2 pi f)) squared times area in square meters divided by cavity volume in cubic meters. Physical length equals effective length minus the supplied total end correction.
Worked example
With 35 L net volume, 35 Hz tuning, a 30 by 4 cm internal slot, sound speed 343 m/s, and an illustrative independently supplied 9 cm total end correction, physical length is approximately 74.407598 cm.
How to use the result
Select the output quantity you need, enter compatible values, and compare the result with the independently worked example. Where the form offers several output choices, read the units in that choice; different physical quantities must not be combined into one total.
Limits and checks
The end correction must suit the actual terminations, shared walls, aspect ratio, bends, and boundaries. The default is an illustrative assumption, not a universal slot correction.
Only constant-area ducts and positive physical lengths are represented. Net displacement, fit, clearance, airflow, losses, port resonances, and actual tuning still require verification.
An undefined or out-of-domain combination produces a calculation-failure message. Check the positive denominators, stated input ranges, and any required matching basis before changing the calculation inputs.