Subwoofer Impedance Calculator
What this calculator measures
Calculate nominal load for identical one- or two-coil drivers, first combining coils within each driver and then combining completed drivers on one channel.
Inputs and units
Keep all entries on the measurement boundary and unit convention stated below. Example values are editable calculation inputs, not specifications for your equipment or a particular production job.
| Input | Example value or available basis |
|---|---|
| Nominal Impedance per Voice Coil (ohms) | 4 |
| Coils per identical driver | Single voice coil; Dual voice coil: two identical coils |
| Identical Drivers on One Channel | 2 |
| Coils within each driver | Parallel; Series |
| Completed drivers on the channel | Parallel; Series |
Calculation method
Calculate nominal load for identical one- or two-coil drivers, first combining coils within each driver and then combining completed drivers on one channel.
Series stages multiply identical coil or driver impedance by their count; parallel stages divide by count. Keep the two wiring stages separate.
Worked example
Two dual-voice-coil drivers with 4-ohm coils have 2 ohms per driver when their two coils are parallel. Connecting those completed drivers in parallel gives a nominal 1-ohm channel load.
How to use the result
Select the output quantity you need, enter compatible values, and compare the result with the independently worked example. Where the form offers several output choices, read the units in that choice; different physical quantities must not be combined into one total.
Limits and checks
The model uses identical nominal coils and symmetric wiring. Actual minimum impedance and amplifier support must be checked separately; do not infer safe operation solely from the nominal arithmetic.
An undefined or out-of-domain combination produces a calculation-failure message. Check the positive denominators, stated input ranges, and any required matching basis before changing the calculation inputs.