Subwoofer Ohm Calculator

Subwoofer Ohm Calculator

Calculate nominal load for identical one- or two-coil drivers, first combining coils within each driver and then combining completed drivers on one channel.
Combined nominal amplifier load:
Support this tool
Buy us a coffee
If this Subwoofer Ohm Calculator helped you, you can support the site with a small donation. It keeps the tools on the site free and supports ongoing improvements.
Buy us a coffee
Secure donation via Gumroad

What this calculator measures

Calculate nominal load for identical one- or two-coil drivers, first combining coils within each driver and then combining completed drivers on one channel.

Inputs and units

Keep all entries on the measurement boundary and unit convention stated below. Example values are editable calculation inputs, not specifications for your equipment or a particular production job.

Input Example value or available basis
Nominal Impedance per Voice Coil (ohms) 4
Coils per identical driver Single voice coil; Dual voice coil: two identical coils
Identical Drivers on One Channel 2
Coils within each driver Parallel; Series
Completed drivers on the channel Parallel; Series

Calculation method

Calculate nominal load for identical one- or two-coil drivers, first combining coils within each driver and then combining completed drivers on one channel.

Series stages multiply identical coil or driver impedance by their count; parallel stages divide by count. Keep the two wiring stages separate.

Worked example

Two dual-voice-coil drivers with 4-ohm coils have 2 ohms per driver when their two coils are parallel. Connecting those completed drivers in parallel gives a nominal 1-ohm channel load.

How to use the result

Select the output quantity you need, enter compatible values, and compare the result with the independently worked example. Where the form offers several output choices, read the units in that choice; different physical quantities must not be combined into one total.

Limits and checks

The model uses identical nominal coils and symmetric wiring. Actual minimum impedance and amplifier support must be checked separately; do not infer safe operation solely from the nominal arithmetic.

An undefined or out-of-domain combination produces a calculation-failure message. Check the positive denominators, stated input ranges, and any required matching basis before changing the calculation inputs.

References and method

Table of contents