Impedance Matching Calculator
What this calculator measures
Compare audio source output resistance and destination input resistance with a simplified resistive voltage-bridging model. This is a loading calculation, not a universal impedance-match certification.
Inputs and units
Keep all entries on the measurement boundary and unit convention stated below. Example values are editable calculation inputs, not specifications for your equipment or a particular production job.
| Input | Example value or available basis |
|---|---|
| Audio Source Output Resistance Model (ohms) | 100 |
| Audio Destination Input Resistance Model (ohms) | 10000 |
| Source Unloaded RMS Voltage (V) | 1 |
| Audio voltage-bridging comparison | Loaded RMS voltage (V); Loaded / unloaded voltage (%); Voltage change from loading (dB) |
Calculation method
Compare audio source output resistance and destination input resistance with a simplified resistive voltage-bridging model. This is a loading calculation, not a universal impedance-match certification.
Loaded voltage equals unloaded source voltage times load resistance divided by the sum of source and load resistance. The percentage and decibel outputs express that same voltage ratio separately.
Worked example
A 1 V RMS unloaded source with 100 ohms output resistance feeding a 10000 ohm input gives approximately 0.990099 V RMS, or 99.0099% of the unloaded voltage and a -0.08643 dB change.
How to use the result
Select the output quantity you need, enter compatible values, and compare the result with the independently worked example. Where the form offers several output choices, read the units in that choice; different physical quantities must not be combined into one total.
Limits and checks
Use compatible balanced line-to-line or unbalanced specifications. Frequency-dependent impedance, cable capacitance, minimum-load capability and output current limits need additional analysis.
Ordinary audio voltage bridging, a transformer-coupled power output and an RF quarter-wave transformer are different applications. This tool does not select a speaker load for a power amplifier or certify microphone/instrument tonal behavior.
An undefined or out-of-domain combination produces a calculation-failure message. Check the positive denominators, stated input ranges, and any required matching basis before changing the calculation inputs.