Amplifier RMS Voltage Calculator

Amplifier RMS Voltage Calculator

Convert stated average output power into RMS voltage per channel for an explicitly resistive load and power boundary.
RMS output voltage per channel under resistive model:
Support this tool
Buy us a coffee
If this Amplifier RMS Voltage Calculator helped you, you can support the site with a small donation. It keeps the tools on the site free and supports ongoing improvements.
Buy us a coffee
Secure donation via Gumroad

What this calculator measures

Convert stated average output power into RMS voltage per channel for an explicitly resistive load and power boundary.

Inputs and units

Keep all entries on the measurement boundary and unit convention stated below. Example values are editable calculation inputs, not specifications for your equipment or a particular production job.

Input Example value or available basis
Stated Average Output Power (W) 100
Resistive Load per Channel (ohms) 4
What the power input represents Power per channel; Total power shared equally among channels
Equal Channels (used only for total-power choice) 2

Calculation method

Convert stated average output power into RMS voltage per channel for an explicitly resistive load and power boundary.

Per-channel voltage equals sqrt(per-channel power times load resistance). Divide by channel count only when the stated input is total power shared equally.

Worked example

100 W per channel into 4 ohms gives 20 V RMS per channel. A 100 W total shared equally by two 4-ohm channels gives approximately 14.142136 V RMS per channel.

How to use the result

Select the output quantity you need, enter compatible values, and compare the result with the independently worked example. Where the form offers several output choices, read the units in that choice; different physical quantities must not be combined into one total.

Limits and checks

Output-voltage conversion does not require amplifier efficiency; efficiency relates output power to input power on a defined boundary.

Real speaker impedance varies with frequency. This nominal resistive reference does not establish actual real power for reactive music loads or an amplifier output guarantee.

An undefined or out-of-domain combination produces a calculation-failure message. Check the positive denominators, stated input ranges, and any required matching basis before changing the calculation inputs.

References and method

Table of contents