Speaker Amp Power Calculator

Speaker Amp Power Calculator

Estimate electrical power per equal uncorrelated source from normalized sensitivity, distance, target SPL, and explicit headroom.
Ideal-reference power per equal uncorrelated source:
Support this tool
Buy us a coffee
If this Speaker Amp Power Calculator helped you, you can support the site with a small donation. It keeps the tools on the site free and supports ongoing improvements.
Buy us a coffee
Secure donation via Gumroad

What this calculator measures

Estimate electrical power per equal uncorrelated source from normalized sensitivity, distance, target SPL, and explicit headroom.

Inputs and units

Keep all entries on the measurement boundary and unit convention stated below. Example values are editable calculation inputs, not specifications for your equipment or a particular production job.

Input Example value or available basis
Target SPL at Listening Position (dB) 85
Explicit Peak Headroom (dB) 6
Sensitivity (dB SPL at 1 W / 1 m) 88
Listening Distance (m) 3
Equal Uncorrelated Sources 1
Documented Room or Placement Adjustment (dB) 0

Calculation method

Estimate electrical power per equal uncorrelated source from normalized sensitivity, distance, target SPL, and explicit headroom.

Use the inverse point-source free-field level equation: 10 raised to (target plus headroom minus sensitivity plus 20 log10(distance) minus 10 log10(source count) minus documented adjustment) divided by 10.

Worked example

Sensitivity 88 dB, target 85 dB, 6 dB explicit headroom, distance 3 m, two equal uncorrelated contributions, and zero adjustment give approximately 8.978680 W per source.

How to use the result

Select the output quantity you need, enter compatible values, and compare the result with the independently worked example. Where the form offers several output choices, read the units in that choice; different physical quantities must not be combined into one total.

Limits and checks

This is a reference estimate, not a rating guarantee. Directivity, coherent or unequal sources, room response, compression, excursion, and actual signal conditions require suitable assessment.

Sensitivity normalization, amplifier load/rating conditions, speaker limits, and protection must be checked separately. Do not double count peak allowances.

An undefined or out-of-domain combination produces a calculation-failure message. Check the positive denominators, stated input ranges, and any required matching basis before changing the calculation inputs.

References and method

Table of contents