Speaker Efficiency Calculator

Speaker Efficiency Calculator

Calculate electroacoustic efficiency from independently established total radiated acoustic power divided by real electrical input power at a defined boundary.
Electroacoustic conversion efficiency for the defined boundary:
Support this tool
Buy us a coffee
If this Speaker Efficiency Calculator helped you, you can support the site with a small donation. It keeps the tools on the site free and supports ongoing improvements.
Buy us a coffee
Secure donation via Gumroad

What this calculator measures

Calculate electroacoustic efficiency from independently established total radiated acoustic power divided by real electrical input power at a defined boundary.

Inputs and units

Keep all entries on the measurement boundary and unit convention stated below. Example values are editable calculation inputs, not specifications for your equipment or a particular production job.

Input Example value or available basis
Real Electrical Input Power at the Defined Speaker Boundary (W) 30
Independently Established Total Radiated Acoustic Power for the Same Condition (W) 0.3

Calculation method

Calculate electroacoustic efficiency from independently established total radiated acoustic power divided by real electrical input power at a defined boundary.

Efficiency percent equals 100 times acoustic output watts divided by electrical input watts, using the same signal, frequency band, and averaging interval.

Worked example

0.3 W total acoustic output from 30 W real electrical input gives 1 percent electroacoustic efficiency under that stated condition.

How to use the result

Select the output quantity you need, enter compatible values, and compare the result with the independently worked example. Where the form offers several output choices, read the units in that choice; different physical quantities must not be combined into one total.

Limits and checks

A single on-axis SPL reading is not total radiated acoustic power. Directivity, radiation geometry, environment, and suitable acoustic-power measurement or integration are required.

Speaker-terminal efficiency differs from whole powered-system input efficiency. Preserve the electrical boundary, bandwidth, signal, and time convention; do not infer percent efficiency from a sensitivity number alone.

An undefined or out-of-domain combination produces a calculation-failure message. Check the positive denominators, stated input ranges, and any required matching basis before changing the calculation inputs.

References and method

Table of contents