Fourth Order Crossover Calculator

Fourth Order Crossover Calculator

Evaluate the ideal fourth-order Linkwitz-Riley low-pass or high-pass amplitude at one frequency. This tool does not synthesize a passive component network.
Selected ideal LR4 response (units in choice):
Support this tool
Buy us a coffee
If this Fourth Order Crossover Calculator helped you, you can support the site with a small donation. It keeps the tools on the site free and supports ongoing improvements.
Buy us a coffee
Secure donation via Gumroad

What this calculator measures

Evaluate the ideal fourth-order Linkwitz-Riley low-pass or high-pass amplitude at one frequency. This tool does not synthesize a passive component network.

Inputs and units

Keep all entries on the measurement boundary and unit convention stated below. Example values are editable calculation inputs, not specifications for your equipment or a particular production job.

Input Example value or available basis
Ideal Linkwitz-Riley Fourth-Order Corner (Hz) 2000
Response Frequency to Evaluate (Hz) 2000
Ideal LR4 response Low-pass amplitude ratio; High-pass amplitude ratio; Low-pass amplitude (dB); High-pass amplitude (dB)

Calculation method

Evaluate the ideal fourth-order Linkwitz-Riley low-pass or high-pass amplitude at one frequency. This tool does not synthesize a passive component network.

An ideal LR4 branch cascades two second-order Butterworth sections at the same corner. With r=f/fc, low-pass amplitude is 1/(1+r to the fourth), and high-pass amplitude is r to the fourth/(1+r to the fourth). Decibel amplitude is 20 log10 of that ratio.

Worked example

At the 2000 Hz corner, both ideal branches have an amplitude ratio of 0.5, or approximately -6.0206 dB. These magnitudes alone do not establish the real drivers' acoustic summation.

How to use the result

Select the output quantity you need, enter compatible values, and compare the result with the independently worked example. Where the form offers several output choices, read the units in that choice; different physical quantities must not be combined into one total.

Limits and checks

A practical active, DSP, or passive implementation needs a defined topology, correct phase/polarity behavior, driver responses, and measurement. Do not treat this response calculator as a list of passive parts.

An undefined or out-of-domain combination produces a calculation-failure message. Check the positive denominators, stated input ranges, and any required matching basis before changing the calculation inputs.

References and method

Table of contents