How to Calculate the Impedance of Two Subwoofers
Calculate two-subwoofer impedance from single or dual coils, compare series and parallel options, and verify a checked 4-ohm network example.
Calculate two-subwoofer impedance from single or dual coils, compare series and parallel options, and verify a checked 4-ohm network example.
Calculate the inductance required for a first-order low pass speaker crossover using driver impedance and crossover frequency.
Calculate one ideal first-order passive crossover component for a nominal resistive driver model. Higher-order networks require a defined topology and additional parts.
Calculate separate ideal first-order components for a two-way crossover using individual nominal resistive driver models.
Estimate a baffle transition and calculate a defined resistor-inductor shelf, with checked asymptotes, center response, and acoustic limitations.
Estimate individual ideal first-order components at the three handover regions of a four-way nominal resistive-driver model.
Calculate one selected ideal first-order crossover component for three nominal resistive driver models. These are individual section estimates, not a complete optimized acoustic three-way crossover.
Calculate separate first-order crossover components, understand the ideal 6 dB-per-octave slope, and check phase, impedance, and real-driver limitations.
Calculate separate ideal first-order components for a two-way crossover using individual nominal resistive driver models.
Calculate one amplifier channel’s nominal load using series, parallel, and identical branch wiring, then compare it with the correct operating-mode specification.
Calculate one ideal first-order series inductor or capacitor for an individual resistive driver model.
Calculate subwoofer impedance by combining coils first and drivers second, with checked dual-coil examples and amplifier-load comparisons.
Estimate an equal-magnitude crossing between two measured driver responses using two frequencies that bracket a change in which driver is louder.
Calculate an ideal first-order electrical corner from a series capacitor or series inductor feeding an explicitly resistive load.
Calculate rectangular speaker-box dimensions from net volume, internal displacement, and two chosen dimensions, then include panel thickness and fit checks.
Calculate one ideal first-order passive crossover component for a nominal resistive driver model. Higher-order networks require a defined topology and additional parts.
Calculate a first-order crossover inductor in mH, check unit conversion, and include winding resistance, component limits, and real-driver response.
Measure vented-box tuning from the impedance minimum between two peaks and compare it with a checked round-port geometry estimate.
Reduce a tweeter by 3 dB using an ideal L pad, compare practical resistor values, and check power dissipation and crossover interaction.
Calculate separate tweeter L-pad resistors, verify attenuation and nominal input resistance, and check each resistor’s dissipation with a worked example.
Calculate wedge subwoofer volume from internal trapezoid geometry, convert units, and subtract realistic driver, port, and brace displacement.
Estimate the effective mass required for a single passive radiator in a simplified lumped closed-box resonance model. The model includes box air stiffness and radiator suspension stiffness.
Estimate a constant-area slot port physical centerline length from the Helmholtz model using an explicitly supplied total end correction.
Evaluate ideal LR4 amplitude and dB response, distinguish fourth-order alignments, and understand the phase and driver conditions required for acoustic summation.
Calculate the resonant frequency of a Helmholtz resonator using cavity volume, neck cross-sectional area, neck length, and end correction. The calculator uses the standard acoustic formula f = (c / (2 * pi)) * sqrt(A / (V * Leff)), where Leff is the effective neck length including end correction.
Estimate tuning of a net air cavity with identical round ports using the conventional fixed-coefficient Helmholtz approximation.
Compare continuous and peak speaker ratings using their test definitions, then distinguish them from an RMS-voltage electrical estimate.
Estimate the tuning frequency of a vented speaker box using enclosure net volume, port diameter, port length, and number of ports. This uses a common Helmholtz-based approximation for round ports and returns the box tuning frequency in hertz.
Calculate stereo triangle depth, equal listening distances, and angle, then check a heuristic distance range against actual room geometry.
Time align two speakers at one point using complete path arrivals, correct delay direction, a shared measurement reference, and practical controller resolution.