Convert pure delay to phase with phase change = −0.36 × frequency in Hz × delay in milliseconds. Positive added delay creates a negative unwrapped phase change under this convention, and the same delay produces a different number of degrees at every frequency.
Open the Subwoofer Phase Delay Calculator.
How to Convert Subwoofer Delay to Phase Degrees
Specify both the delay and reference frequency before interpreting phase. A statement such as “3 ms equals 90 degrees” is incomplete because that equivalence depends on frequency.
The calculator converts a signed pure time delay into its unwrapped phase change at one frequency. Its positive delay input means a later signal; a negative input represents a mathematical advance relative to the reference.
It does not determine the subwoofer’s complete phase response, identify which path should be delayed, or select a correct alignment setting. Those questions require the measured relationship between the subwoofer and main-speaker paths.
Use this conversion to understand the consequence of a known delay or to compare an observed phase slope with a pure-delay reference. Keep the measurement reference and sign convention visible throughout the process.
Derive the Time-to-Phase Relationship
One complete cycle spans 360 degrees. A sinusoid at frequency f has period T = 1/f seconds, so a delay t occupies t/T = f × t cycles.
The magnitude of the associated phase change is therefore 360 × f × t degrees. Under the common frequency-response convention exp(−j omega t), a positive delay adds negative phase:
Delta phi = −360 f t
When t is entered in milliseconds, divide it by 1,000:
Delta phi = −0.36 f tms
This is a pure-delay relationship. A real subwoofer path includes driver behavior, enclosure loading, filters, electronics, and propagation, so its phase need not follow that straight-line relationship across the entire band.
Room EQ Wizard’s group-delay documentation relates delay to phase behavior and the measurement’s timing reference. It helps distinguish a constant pure delay from other frequency-dependent delay behavior.
Work Through a Three-Millisecond Example
Assume an added pure delay of 3 ms and a reference frequency of 80 Hz. The period at 80 Hz is 1000/80 = 12.5 ms.
The delay occupies 3/12.5 = 0.24 cycle, so the phase change is:
Delta phi = −360 × 0.24 = −86.4 degrees
The calculator reaches the same result directly with −0.36 × 80 × 3.
At other frequencies, the same 3 ms creates:
| Reference frequency | Period | Unwrapped phase change from 3 ms |
|---|---|---|
| 40 Hz | 25.0000 ms | −43.2 degrees |
| 80 Hz | 12.5000 ms | −86.4 degrees |
| 120 Hz | 8.3333 ms | −129.6 degrees |
| 160 Hz | 6.2500 ms | −172.8 degrees |
The table shows why a delay adjustment cannot be described as one fixed phase rotation across a band. It creates a phase change proportional to frequency.
These values describe the additional pure delay only. If the original subwoofer path already had a nonzero relative phase, add this change to that original unwrapped relationship under the same reference convention.
Distinguish Unwrapped Phase From the Displayed Angle
Many phase plots display angles within a limited range, such as −180 to +180 degrees. Values outside that range wrap by whole multiples of 360 degrees.
For example, a 12.5 ms delay at 80 Hz produces −360 degrees unwrapped. On a wrapped display, that can appear at the same angle as 0 degrees, although the signal is one complete period later.
Likewise, −270 degrees and +90 degrees represent the same wrapped angle at one frequency. They do not necessarily identify the same broadband timing relationship.
The calculator intentionally reports unwrapped change. Keep it unwrapped when examining the phase slope or tracking the effect of added delay across frequency.
A wrapped match at one frequency does not prove that two signals arrive at the same time. Different whole-cycle delays can share that angle while producing different phase relationships elsewhere in the crossover region.
Understand Why Phase Does Not Uniquely Reveal Delay
Rearranging the pure-delay equation gives:
tms = −Delta phi / (0.36 f)
At 80 Hz, a −90-degree unwrapped change corresponds to 3.125 ms under that pure-delay assumption. But a wrapped −90-degree reading could also represent −450 degrees, −810 degrees, or other cycle-related possibilities.
Each additional negative 360 degrees at 80 Hz adds another 12.5 ms. Without a valid timing reference or phase-unwrapping information, the single-frequency angle does not determine the unique delay.
Also confirm that the phase difference is actually attributable to pure delay. Filter phase and driver response can contribute a similar angle at one frequency without corresponding to the same constant time shift across the band.
Do not convert a total measured phase angle into a delay and assume every part of the subwoofer path has been identified. Use the complete response and timing context.
Separate Polarity and Phase Controls From Pure Delay
Polarity inversion changes the signal sign, contributing a 180-degree phase reversal at every frequency under the ideal model. A fixed delay does something different: its phase effect varies with frequency.
A knob labeled phase may implement an all-pass filter or another frequency-dependent circuit rather than a simple digital time delay. The manufacturer’s description determines what that control actually changes.
An all-pass section can retain magnitude while changing phase, but its group delay is generally not the same constant value across the band as a pure delay. A labeled angular setting should therefore not automatically be converted into one fixed number of milliseconds.
Linkwitz’s filter discussion includes delay-correction and all-pass examples. Those defined circuits illustrate why filter phase behavior and a pure time offset should not be treated as interchangeable controls.
Keep polarity state, phase-control setting, DSP delay, and receiver distance adjustment as separate entries in the setup record.
Decide Which Path Can Be Delayed
Adding delay makes a path later. It cannot make an already late subwoofer arrive earlier relative to unchanged mains.
If the subwoofer path is late, the appropriate system adjustment may involve delaying the mains, changing processing, or another design choice supported by the equipment. A calculator’s negative delay is a mathematical comparison, not proof that the hardware can advance a real-time signal.
Receiver distance settings may map to relative delays through the processor’s own convention. Do not assume increasing a displayed distance always has the same effect as entering a larger delay into a different DSP.
Review the actual equipment’s behavior and verify the resulting acoustic relationship. A correct degree conversion applied to the wrong signal path can worsen the alignment.
Measure the Relative Paths With a Timing Reference
Measure the mains and subwoofer separately with a common timing reference, unchanged microphone position, and the actual crossover and processing active. Preserve the measured relationship rather than independently shifting every trace to an arbitrary zero.
Room EQ Wizard’s impulse-response documentation explains the significance of the response time reference. This matters when comparing separate paths and interpreting their phase differences.
Inspect the relevant transition band rather than only one cursor frequency. The objective is the intended combined response and phase relationship through that region, not necessarily zero phase difference for every crossover topology.
Measure the combined result after an adjustment. Magnitude summation, polarity behavior, and response across the intended seats provide evidence that the change achieved the design goal.
Preserve a Signed, Frequency-Specific Record
Record the original relative response, reference frequency, signed delay change, predicted unwrapped phase change, control applied, and measured combined result.
If comparing wrapped plots, annotate the whole-cycle interpretation where necessary. A curve that crosses the plot boundary has not necessarily undergone a sudden physical timing jump.
Repeat the relevant measurements after changing filters, routing, processing modes, or subwoofer position. Those changes can alter the path even if the visible delay number remains unchanged.
The conversion is most useful when its narrow meaning stays explicit: it predicts the phase consequence of a known pure delay at a known frequency, while the complete acoustic measurements determine whether that delay helps the actual system.