Subtract the manufacturer’s documented installed driver displacement from the enclosure’s gross internal volume, along with bracing, terminals, and other internal objects. Use the same units throughout and check whether the enclosure plan already includes those deductions before subtracting anything.
Open the Sealed Box Volume Calculator.
How to Subtract Driver Displacement From a Sealed Box
A sealed-box volume specification normally concerns the air cavity available to the driver, but a plan may describe net air volume, gross internal volume, or a completed design with displacement already included. Identify that boundary first.
The calculation for a simple enclosure is:
Vnet = Vgross internal − Vdriver − Vbracing − Vother
Here, physical driver displacement means the volume occupied inside the enclosure by the installed driver structure. It is different from the cone’s swept volume, which describes cone area multiplied by excursion.
The calculator accepts rectangular internal dimensions in inches, then subtracts one total driver-displacement entry and one combined bracing/terminal entry in cubic feet. It does not count drivers automatically. If two identical drivers are installed, add their physical displacement before entering the total.
This arithmetic establishes a geometric air-volume budget. Whether that net volume produces a suitable sealed alignment requires the actual driver’s parameters, operating limits, and design objective.
Establish Whether the Dimensions Are Internal
For a rectangular cavity, multiply its clear internal length, width, and height. With inches, divide the resulting cubic inches by 1,728 to obtain cubic feet:
Vgross = L × W × H / 1728
Do not subtract wall thickness from dimensions that are already internal. Conversely, an enclosure’s exterior dimensions cannot be entered as though the panels occupied no space.
For a simple closed rectangular box with uniform wall thickness t, each internal axis is the corresponding external axis minus 2t. More complex construction can include a double baffle, inset panels, braces, or a stepped chamber, so use the actual section drawing rather than an automatic uniform-thickness assumption.
KICKER’s box-building guide discusses enclosure construction and plan conventions. The manufacturer’s driver-specific plan remains the relevant starting point when it is available.
Take care with decorative recesses and baffle cutouts. The visible outer shape does not always match the air cavity boundary. A recessed front panel, for example, may leave exterior space that contributes nothing to the sealed internal chamber.
Obtain the Correct Driver Displacement
Look for physical displacement in the driver manual, enclosure drawing, or manufacturer support documentation. Check the units and whether the quoted figure applies to the portion of the driver installed inside the box in the intended mounting orientation.
Do not estimate driver displacement by treating the entire basket as a solid cylinder. Open basket windows and the detailed motor shape mean that an envelope volume can substantially overstate the excluded air volume.
Likewise, do not use Sd × Xmax for this deduction. That quantity is a one-way swept volume convention used in output and excursion discussions. It does not describe the space occupied by the magnet, basket, and other stationary driver structure.
JL Audio’s enclosure-volume guidance through Garmin support distinguishes internal volume and displacement in enclosure calculations. Apply the displacement convention stated for your actual driver rather than borrowing another model’s figure.
If physical displacement is unavailable, request the manufacturer value or use a documented geometry estimate with its uncertainty clearly identified. Avoid presenting an approximate basket-envelope calculation as a published driver specification.
For an inverted installation, the portion inside the cavity changes. A normal-mount displacement figure may no longer apply. The design may also need attention to the driver opening, mechanical clearances, sealing, and terminal routing beyond the arithmetic.
Work Through a Two-Driver Sealed Box
Consider a hypothetical rectangular box with clear internal dimensions of 18 by 14 by 12 inches. Its gross internal volume is:
Vgross = 18 × 14 × 12 / 1728 = 1.75 ft³
Suppose each of two installed drivers has a documented physical displacement of 0.08 ft³. Their combined displacement is 2 × 0.08 = 0.16 ft³.
Suppose the bracing and terminal assembly occupy another 0.06 ft³ in total. The net air volume becomes:
Vnet = 1.75 − 0.16 − 0.06 = 1.53 ft³
In liters, that is 1.53 × 28.316846592 ≈ 43.3248 L for the shared cavity. If the two drivers are intended to share that cavity, this is the combined chamber volume, not automatically the recommended volume for each driver.
| Volume budget item | Volume |
|---|---|
| Gross internal rectangular cavity | 1.750 ft³ |
| First driver’s physical displacement | −0.080 ft³ |
| Second driver’s physical displacement | −0.080 ft³ |
| Bracing and terminal assembly | −0.060 ft³ |
| Remaining net air volume | 1.530 ft³ |
Enter the dimensions as 18, 14, and 12, the total driver displacement as 0.16, and the bracing/terminal entry as 0.06. Do not enter 0.08 unless only one of those hypothetical drivers occupies the calculated chamber.
Calculate Braces and Other Internal Objects
For a solid rectangular brace, multiply its actual thickness, width, and length. Convert to cubic feet or liters using the same volume convention as the rest of the worksheet.
For a window brace, subtract the openings from the solid panel volume. If two braces intersect, account for their shared region once. Summing their full overlapping volumes would deduct material that does not physically exist twice.
For example, a hypothetical 0.75-inch-thick brace with an outer rectangle 14 by 12 inches and a 10 by 8 inch opening occupies:
0.75 × (14 × 12 − 10 × 8) = 66 in³
That is 66 / 1728 ≈ 0.038194 ft³. The opening remains air space; the surrounding brace material is the displacement.
Include a crossover board, amplifier module, battery compartment, terminal cup, or separate sealed pocket if it occupies or excludes part of the cavity. A partition that creates an inaccessible chamber must be represented by the geometry of the usable chamber, rather than counting the entire enclosure as one air volume.
Record how irregular items were estimated. A cautious uncertainty range is more useful than decimal precision that exceeds the available dimensional information.
Reverse the Calculation When Designing the Box
When the desired net volume is known, add the planned displacement to obtain the required gross internal volume:
Vgross required = Vnet target + Vdriver + Vbracing + Vother
For the example, a 1.53 ft³ target plus 0.16 ft³ of drivers and 0.06 ft³ of other displacement requires 1.75 ft³ gross. With internal length 18 inches and width 14 inches, the necessary internal height is:
H = 1.75 × 1728 / (18 × 14) = 12 inches
Only after determining the internal geometry should exterior dimensions be derived from the actual panel arrangement. Panel overlap and a double baffle affect the cut list, even when the intended internal air volume remains unchanged.
Check driver depth, magnet clearance, mounting screw positions, brace locations, and assembly access before finalizing the dimensions. A volume-correct box can still fail to accommodate its driver physically.
Avoid Double Counting a Published Enclosure Plan
A manufacturer may publish a target net volume plus instructions to add driver displacement. Another plan may provide exact external dimensions for a complete box and already include the recommended driver and bracing.
Those are different starting points. Adding displacement again to a complete proven plan makes the cavity larger than intended. Subtracting displacement twice from an already stated net volume makes the reported air volume too small.
Keep a short note identifying the source boundary: “net target before displacement,” “gross internal dimensions,” or “finished manufacturer plan.” If the wording is unclear, resolve it before changing the design.
The calculator has no way to infer that convention from a number. Its subtraction is straightforward, so the quality of the result depends largely on choosing the correct boundary and total displacement inputs.
Keep Fill and Alignment Separate From Geometric Volume
Absorptive fill can change the enclosure’s acoustic behavior and losses, but it should not be assigned a universal percentage increase in geometric liters. Material, amount, placement, frequency, and the complete system affect the result.
Retain the actual geometric net air-volume calculation even when a model includes an effective acoustic-volume adjustment. Do not hide a fill assumption inside the physical driver-displacement entry.
For a sealed alignment, driver parameters and box air compliance influence system resonance and damping. Changing net volume therefore has a design consequence, but the geometric calculator alone does not determine the appropriate target or maximum usable output.
Verify the completed enclosure is sealed as intended and that the installed driver, terminals, and joints do not create unintended leaks. Where the design needs confirmation, use an appropriate low-level impedance measurement and the driver’s documented parameters rather than judging the net volume from external size alone.
Keep the original plan, dimensional sketch, driver quantity, source displacement values, brace calculation, other internal objects, and final gross-to-net worksheet together. That record makes later revisions possible without reintroducing the same deductions or confusing shared and per-driver chamber volumes.